The cleanest part of anyone’s house should be his or her bathroom since this is where we supposedly go to clean and relieve ourselves. Some even says that you would immediately know the entire hygiene practice of a person by looking at their bathroom’s tidiness and cleanliness. After all, this is where bacteria could easily thrive and with the presence of water and warmth, other microorganisms might make themselves at home in between your bathroom tiles and of course, your toilet! However, while many pay attention to their tiled floors, toilet bowl, and shower room, they completely forget about their toilet tanks where water is stored for toilet flushing. Unfortunately, toilet tanks are very prone to staining, dirt accumulation, and worst of all, microorganism-build up due to its environment within.
It’s not fun to clean a bathroom, but leaving a toilet unattended, particularly your toilet tanks, can be disastrous both to your health and the toilet bowl’s lifespan as it becomes contaminated. Neglected bathroom, especially if left uncleaned for a long time, could cause many health-related problems as slimes or soapy scums, and molds accumulates very easily in moist and dark environment. Aside from this, ignoring the grime and dirt would not make it go away, and if they remain stagnant, they would be even more difficult to remove and would lead to your toilet tank’s corrosion and eventually, malfunctioning.
Before diving in and attacking your toilet tank after realizing how you neglected it for a long period of time, know first the types of cleaners there are in order for you to choose which one is best to solve your dirty toilet’s tank’s problem. The five basic types of cleaners are:
a. Surfactants are all-purpose cleaner product, which specializes in reaching tiny cracks or pores for deep cleansing.
b. Basic Cleaners are cleaning agents that has a pH greater than seven. This is great to use against mildews and mold-buildup.
c. Acidic Cleaners are the most popularly used and are capable of breaking down stains and discolored toilet’s tanks by dissolving them. This could just be vinegar and lemon juice, or stronger ones such as hydrochloric acid, phosphoric acid, and sulfuric acid.
d. Organic Solvents are usually used to fight the grease and grime, especially the stubborn ones, which stick for quite some time. You can buy this at the market easily.
e. Disinfectants are easily obtainable which loosen up stains by removing the microorganism that has built up on your toilet tank.
There are homemade cleaners, but you can also buy a specialized chemical cleaner such as Sooth Corporation’s Instant Primer Toilet Tank Cleaner that could do all the job and gives you a pristinely cleansed toilet tank overnight.
Resolving Toilet Tank Cleaning Issues
Despite filtration efforts, the water in your faucet is actually full of minerals and other particles since the pathways of water, the pipes, are not being cleaned and probably contains traces of iron. As a result, a so-called “hard water” gets delivered to many homes, and as it continuously passes through your toilet tank, it’s bound to leave behind a blackish stain, or reddish-brown smattering.
First Step: Flush the toilet until only little water remains in the toilet tank. Unplug the water supply, as well.
Second Step: Protect yourself by wearing gloves, goggles, and even masks to prevent inhalation of cleaning material’s fumes.
Third Step: Select your cleaner type. Since this is a stain, choose acidic cleaner. First, though, use a surfactant to loosen the iron’s stickiness to the tank. Then dilute a hydrochloric acid (HCl).
Fourth Step: Pour conc. bleach into the toilet tank and scrub the wall thoroughly. Connect the water plug, and flush until all traces of bleach is gone. The iron stain will slightly fade by then.
Fifth Step: Pour the diluted HCl into the tank. Handle this carefully since HCl is corrosive. Scrub again, preferably with sharp-bristled brush, then flush with water.
There are many kinds of molds but the most common one is the black molds, which can be seen on dirty bathroom tiles. It thrives in moist and dim environment so your toilet tank seems heavenly to this fungus. Unfortunately, it is announced by WHO as a danger to human’s health, so avoid exposure to molds by cleaning your toilet tanks regularly and by reducing humidity inside your bathroom.
First and second steps include emptying your toilet tank and protecting yourself up, just like in stain-cleaning.
Third Step: Bleach the toilet tank and scrub thoroughly. Flush with water.
Fourth Step: Prepare a mixture of white vinegar and baking soda in cold water. Scrub off the toilet tank using the mixture and then flush with water.
Fifth Step: Apply disinfectant cleaners because of mold’s nature, which causes an upset stomach and dizziness.
As times passes by, toilet tanks would start to disintegrate due to the presence of water and constant movement from the pipe system arranged within after every flush, thus, staining is bound to occur and although harmless in itself, it can be the root of other problems. Minerals from water might get attached to the stained portions of the toilet tank and then molds could also prosper in stained areas as it finds hidden place to reproduce.
The first and second step include emptying the toilet tank of water and gearing up with gloves, goggles, and masks.
Third Step: By convention, white vinegar mixed with water would do the job, but might require an hour-long of scrubbing.
Fourth Step: Use soda particularly Coca-Cola to remove stains. Coke is an iconic refresher drink around the world, but it has other uses too, because of its phosphoric and carbonic acid content. Without diluting with water, pour the coke into the toilet tank and scrub. You can expect an immediate result.
Step Five: Flush with water, preferably distilled water to remove the sugar content of coke, or use a soda water as an alternative.
The whitish materials spread all over your bathroom floor and walls like snowflakes are actually called a “scum” and is a product of the soap that you use. It attaches itself to most surfaces and even inside your toilet tank. After flushing the toilet tank to free it of water and using protective clothing, do as follows:
First Step: Dilute a conc. Chlorine with distilled water. Mix well.
Second Step: Pour the mixture into the toilet tank and scrub well. You will quickly witness a result as the white spots gets shredded off with halogenated cleaner.
Third Step: With a baking soda powder, cover the toilet tank with a thin film and leave overnight. Scums can be stubborn as they tend to reappear soon after cleaning, but baking soda would prevent a comeback.
Fourth Step: Flush with water the next day.
Cleaning the bathroom should be part of a routine in order to facilitate hygiene issues and health-related problems. Regularly cleaning the toilet tank lessens dirt accumulation and therefore lessens cleaning workload. Additionally, purchasing a water purifier and all-purpose-cleaners might contribute a lot in your toilet tank maintenance.